Fun Stuff > MAKE
home made shirts/clothes
Lines:
Photo emulsion is pretty easy. Print off on a transparency or do a cut out of black paper and in a dark room: coat your screen, let it dry, get a light bulb that emits "natural light", let it expose for such and such time, and then rinse with water. When you're done, you put photo emulsion remover on it, let it sit for 15 min, then rinse it off with water. I haven't done ruby-lith, but it's definitely easier than using red blockout or blue drawing fluid. Stencils from contact paper are less complicated, but they take about as much time and they don't get very detailed.
And all the silk screening inks I have used have been acrylic. I know you can get oil based, but I think that's a bit silly, due to all the solvents you'd need to clean out your screens.
screamingfool:
yeah, that much i know about photo emulsion, i mostly dont want to waste time and materials getting the distance and timing of the uv light just right. which is totally lame i know.
as far as using rubylith, i didn't follow you (linds) about the blockout thing, i've never messed with that. All i do is attach the image i want to cut out on the acetate side of rubylith and cut out the stencil with a slightly dulled xacto knife (so you don't have to worry about cutting through the acetate). Then put the image rubylith side up on a bed of newspaper, put the screen silk side down on top and apply a light coat of lacquer thinner to a roughly 3 in square corner of the stencil. Rub the now melty stencil into the screen a little with a hard edged squeegee that has a layer of cloth over it. Do this from one corner of the stencil to the other and let it firm back up for 20 minutes, then peel off the acetate slowly from one corner making sure the stencil is affixed, if it comes off put it back and give it a little love with the thinner.
The downsides of this method are rubylith doesn't come out of the screen as easily as other materials (only a downside if you make small runs of things you don't plan to print again) and you gotta cut it out by hand so you're limited to making things you have the patience and skill for (i like it this way cause it streamlines designs and gives it a distinctive look).
and i use straight up acrylic paint, not the stuff made for silkscreening cause i find it sets thicker, bolder, lasts longer and most importantly doesn't bleed, the only downside being you have you wash out the screen a lot more often.
FireAarro:
It's Homemade Band T-Shirt O'Clock!
*not actually a Muse fan*
Some white leaked under the stencil or something. I didn't like this so much at first because of that but I've gotten used to it and it looks kinda cool.
Orbert:
It's a cool effect, actually. Outlines the letters nicely, and doing it intentionally would probably have been ten times harder, and still not come out as good.
ampersandwitch:
godyouaresocool
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version