THESE FORUMS NOW CLOSED (read only)
Fun Stuff => CLIKC => Topic started by: Scandanavian War Machine on 15 Jan 2009, 17:56
-
guys i am hella dumb and need your help.
my PS3 seems to be using the same IP address as my computer to connect to the internet and apparently this a problem for some reason. basically, every time i turn on my PS3 there is a chance that my internet will "break" and i'll have to go upstairs and reset my modem and router. this is a pain in the ass and i'd to not have to do it anymore. it doesn't happen every time and i haven't tried turning the PS3 on with the computer on/off to see if that makes a difference.
is this a common problem? thanks in advance for any help.
-
Are your machines using DHCP/router giving them dynamic addresses? If so you can usually plug in the mac addresses of the offending items (ie: the pc & the ps3) and tell the router to assign specific (different) addresses to them.
Another way to do it is to turn both your pc and your ps3 on, then on your pc open up a command prompt ("cmd" from the run box/search bar) and type "ipconfig /release" then "ipconfig /renew" to request a new ip address from the router. Hopefully it'll see that they both have the same IP address and issue a new one.
Alternatively, one or both of the machines are set to have static ip addresses. If so then either set both to have different static addresses or set both to use DHCP and request new DHCP leases from the router.
Hope that helps!
-
alright, i am going to try to fiddle with it this weekend if i have time. thanks for the help.
-
You can also just assign your PS3 and your PC different static addresses on your router's subnet.
For example, if your router is 192.168.1.1, give your PS3 the address 192.168.1.101, and your PC 192.168.1.102. Most DHCP servers on consumer routers assign x.x.x.2-100 as DHCP addresses, so anything in the range of 101-254 is safe.